1987 Nissan Sentra Speaker Sizes
The 1987 Nissan Sentra factory audio system features front door panel and rear deck lid locations that accommodate 6.5 inch speakers. Midbass and full-range units serve as viable replacement and upgrade components for the vehicle.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6.5 | Midbass / Full-Range |
|
1987 Nissan Sentra Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01987 Nissan Sentra Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1987 Nissan Sentra features 6.5 inch openings in both front and rear locations, which may simplify the replacement process when selecting aftermarket components.
- Full-range speakers could handle a wide frequency spectrum without requiring separate tweeters, while midbass drivers might focus on mid and low frequencies if paired with additional high-frequency units.
- The front door panels typically receive priority during upgrades, as this location often contributes more directly to the soundstage perceived by front-seat occupants.
- Rear deck lid installations may benefit from speakers with moisture-resistant materials, considering potential exposure to temperature variations through the rear glass area.
- Component speakers in the front position could offer separation of frequency ranges through crossovers, potentially yielding clearer vocal reproduction compared to full-range alternatives.
- The single DIN radio opening suggests standard aftermarket head unit compatibility, which might enable modern features like amplified outputs or digital signal processing to drive upgraded speakers.
- Matching impedance ratings between replacement speakers and the audio source could prevent underpowering or potential damage to either component.
- Speaker sensitivity ratings above 90 dB might produce adequate volume levels with factory or modest aftermarket amplification.
- The uniform 6.5 inch sizing across locations could allow for consistent tonal characteristics if identical speaker models are installed throughout the cabin.