2010 Nissan Versa Speaker Sizes
The factory audio system for the 2010 Nissan Versa features specific locations paired with compatible units, where the a-pillar accepts a 1 inch speaker size, and the front door panel and rear door panel accommodate 6.5 inch units. Tweeter, midbass, and full-range compatible types function as a replacement or upgrade for the vehicle.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2010 Nissan Versa Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 1Replacement priority:
High: 1 Medium: 1 Low: 12010 Nissan Versa Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2010 Nissan Versa features a three-point speaker configuration in each front door area, combining a 1-inch tweeter location in the A-pillar with a 6.5-inch driver position in the door panel itself.
- Front door panel speakers would likely represent the primary upgrade priority, as these 6.5-inch locations handle the majority of mid-range and vocal frequencies that passengers encounter most directly.
- The A-pillar tweeter positions may provide an option for enhanced high-frequency response when paired with component speaker systems rather than relying solely on full-range drivers in the doors.
- Rear door panels accept the same 6.5-inch speaker size as the front doors, which could simplify the selection process when upgrading multiple locations simultaneously.
- Both midbass and full-range speaker types show compatibility with the 6.5-inch locations, suggesting flexibility between component system woofers and standalone coaxial speakers depending on the installation approach.
- The dual radio size compatibility indicates that aftermarket head unit installation could accommodate either standard single DIN models or larger touchscreen double DIN units without requiring additional dash modifications.
- Component speaker systems might take advantage of the separate tweeter and midbass locations, potentially offering improved soundstage imaging compared to coaxial speakers installed only in the door panels.
- The uniform 6.5-inch sizing across front and rear doors suggests that tonal balance throughout the cabin could be maintained more easily when using matched speaker sets in all four locations.