2000 Oldsmobile Intrigue Speaker Sizes
The 2000 Oldsmobile Intrigue factory audio system includes specific mounting points, where the front door panel accommodates a 5.25 inch speaker size, and the rear deck lid supports 6x9 inch units. For an acoustic replacement upgrade, midbass and full-range compatible speaker types function properly within the vehicle.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
2000 Oldsmobile Intrigue Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02000 Oldsmobile Intrigue Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2000 Oldsmobile Intrigue utilizes 5.25-inch speakers in the front door panels, which can accommodate either midbass or full-range driver configurations depending on system design preferences.
- Rear deck lid positions accept 6x9-inch speakers designated for full-range reproduction, providing a larger cone area compared to the front locations.
- Replacement of the rear deck speakers may offer substantial sound improvement potential due to the larger surface area available for sound wave generation in the 6x9-inch format.
- The front door locations suggest prioritization for midbass or full-range drivers that can handle mid-frequency and lower-frequency content within the 5.25-inch form factor constraints.
- Both single DIN and double DIN radio configurations are compatible with the 2000 Oldsmobile Intrigue dash opening, allowing flexibility in head unit selection during upgrades.
- The speaker configuration follows a common front-rear layout pattern where smaller front drivers may be supplemented by larger rear speakers for extended bass response.
- Full-range compatibility in both locations suggests the factory system design may not have included separate tweeters or crossover networks in the original configuration.
- Aftermarket component speaker systems with separate tweeters could potentially be adapted to the front door positions if mounting locations for tweeters are identified or created.