1984 Peugeot 505 Speaker Sizes
The 1984 Peugeot 505 speaker size chart provides specifications for factory and aftermarket audio system components. Information covers replacement speaker locations in the front kick panel and rear deck lid areas. Detailed specifications assist with aftermarket upgrade installations and factory audio system replacements.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Kick Panel | 5.25 | Midbass |
|
| Rear Deck Lid | 5.25 | Midbass / Full-Range |
|
1984 Peugeot 505 Speaker Replacement Summary
2
total positions
1
easy to replace
0
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 0 Medium: 2 Low: 01984 Peugeot 505 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front kick panel locations in the 1984 Peugeot 505 accept 5.25 inch midbass drivers, which suggests these positions were designed to handle lower frequency content rather than serve as general-purpose full-range units.
- Rear deck lid positions accommodate 5.25 inch speakers with flexibility between midbass and full-range configurations, potentially allowing the rear soundstage to be tuned according to whether front speakers handle full bandwidth or operate in a component arrangement.
- The single DIN radio slot indicates compatibility with aftermarket head units that might provide greater power output and signal processing capabilities compared to original equipment.
- Upgrading the kick panel speakers to quality midbass drivers could enhance lower midrange response and vocal clarity, as these locations typically benefit from proximity to the listening position.
- The 5.25 inch format across all positions in the 1984 Peugeot 505 creates consistency in replacement part selection, though smaller cone area compared to 6.5 inch alternatives may affect maximum output levels and bass extension.
- Component speaker systems with separate tweeters might work well with midbass drivers in the kick panels, while rear deck locations could handle coaxial full-range units to fill the cabin without requiring additional crossover complexity.