1996 Pontiac Grand Prix Speaker Sizes
A speaker size chart for the 1996 Pontiac Grand Prix shows factory speaker locations in the front door panels and rear deck lid. The chart provides specifications for replacement speakers, including aftermarket options available for audio system upgrades. Information covers original equipment sizes and compatible aftermarket speakers for each position within the vehicle's sound system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
1996 Pontiac Grand Prix Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01996 Pontiac Grand Prix Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1996 Pontiac Grand Prix front door panels accommodate 5.25 inch speakers, which can be replaced with either midbass drivers or full-range units depending on the desired audio configuration and whether tweeters are installed separately.
- Rear deck lid positions accept 6x9 inch speakers designed for full-range reproduction, offering a larger cone area compared to the front speakers for enhanced bass response and overall output.
- Midbass speakers in the front locations would typically handle frequencies from approximately 80 Hz to 4 kHz, requiring separate tweeters for high-frequency reproduction above that range.
- Full-range speakers in either location would reproduce the entire frequency spectrum from a single driver, though this approach may compromise performance at frequency extremes compared to dedicated component systems.
- The 6x9 inch format in the rear provides greater surface area than round speakers of similar diameter, potentially allowing for increased low-frequency extension and sensitivity when properly powered.
- Replacing factory speakers with aftermarket units of matching size could provide improvements in clarity, dynamic range, and frequency response depending on the quality of the replacement components selected.
- The single DIN radio opening allows for head unit upgrades that may offer increased power output, equalization options, and signal processing capabilities to complement speaker replacements.