1998 Saturn SL1 Speaker Sizes
A speaker size chart for the 1998 Saturn SL1 provides factory audio system specifications and replacement details. Information includes OEM speaker locations in front door panels and rear door panels. Data covers aftermarket upgrade options and specifications for speakers installed in the audio system from the factory.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
1998 Saturn SL1 Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01998 Saturn SL1 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1998 Saturn SL1 positions speakers in both front and rear door panels, each accommodating 6.5 inch units capable of handling midbass or full-range drivers.
- Replacing door panel speakers could prioritize the front locations first, as these typically contribute more directly to the primary listening position and stereo imaging in most cabin configurations.
- Full-range speakers would handle both mid-frequency vocals and upper bass content through a single cone design, while midbass-specific drivers might pair with separate tweeters for potentially wider frequency distribution.
- The uniform 6.5 inch sizing across all four door locations allows for consistent driver selection and may simplify installation procedures when upgrading multiple positions simultaneously.
- Sound improvement from aftermarket speakers often stems from higher sensitivity ratings, stronger magnet structures, and more rigid cone materials compared to original equipment components.
- The single or double DIN radio compatibility provides flexibility for head unit upgrades that could enhance amplification power and signal processing to the replacement speakers.
- Coaxial full-range speakers integrate tweeters into the same basket as the woofer cone, potentially offering simpler installation than component systems requiring separate tweeter mounting.
- Door panel mounting depth and clearance behind the speaker basket would need verification during installation to prevent interference with window mechanisms or door hardware.