2014 Scion xB Speaker Sizes
The 2014 Scion xB factory audio system includes specific mounting areas where the dashboard accommodates a 1 inch speaker size, and the front door panel and rear side panel accept 6.5 inch speakers. Audio replacement and upgrade alternatives for these locations comprise tweeters, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 6.5 | Midbass / Full-Range |
|
2014 Scion xB Speaker Replacement Summary
3
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 2 High: 0Replacement priority:
High: 1 Medium: 1 Low: 12014 Scion xB Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2014 Scion xB uses dashboard tweeters measuring 1 inch, which handle the higher frequency ranges of the audio spectrum. These small drivers are typically easier to replace than larger speakers due to their compact size and simple mounting locations.
- Both front and rear locations accept 6.5-inch speakers, creating uniformity in component selection when upgrading the sound system. This standardization may simplify the purchasing process since the same speaker model could potentially be installed in all four positions.
- The front door panels house 6.5-inch speakers that can accommodate either midbass or full-range drivers. Midbass speakers would focus on lower-mid frequencies, while full-range options would attempt to reproduce a broader spectrum without the dedicated tweeter.
- Rear side panels mirror the front door configuration with 6.5-inch openings that support midbass or full-range speakers. The choice between these types may depend on whether the factory tweeter system remains in place or if a different approach to frequency distribution is preferred.
- The single DIN and double DIN compatibility offers flexibility for aftermarket head unit installation. A double DIN receiver would occupy more dashboard space but typically provides additional features like larger touchscreens or integrated climate controls.
- Upgrading from full-range speakers to component midbass drivers in the doors while retaining the dashboard tweeters might improve midrange clarity and overall soundstage. This configuration takes advantage of the existing crossover point between the tweeter and larger drivers.
- The 1-inch tweeter size is relatively standard for dashboard applications, though mounting depth and impedance would need verification before replacement to ensure compatibility with aftermarket options.