2013 Smart Fortwo Speaker Sizes
The 2013 Smart Fortwo speaker size chart provides specifications for factory and aftermarket audio system components. Information covers replacement speaker sizes and locations within the vehicle, including front door panel positions. Details support audio system upgrade planning by identifying compatible aftermarket speaker specifications for each mounting location.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
2013 Smart Fortwo Speaker Replacement Summary
1
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 0 Low: 02013 Smart Fortwo Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2013 Smart Fortwo front door panels accommodate 5.25 inch speakers, which can accept either midbass drivers or full-range units depending on the installation approach and audio preferences selected.
- Midbass drivers typically handle frequencies between approximately 80 Hz and 500 Hz, focusing on lower midrange content and punch, while requiring separate tweeters to reproduce higher frequencies in a component configuration.
- Full-range speakers incorporate a single cone design that attempts to reproduce the entire audible spectrum from bass through treble, offering a simpler installation without the need for additional tweeter mounting locations.
- The factory locations in the front doors represent the primary positions for sound reproduction in this vehicle, as rear speaker positions are not specified in the available data.
- Replacing the front door speakers with aftermarket units may address tonal balance, dynamic range, and overall clarity compared to original equipment, particularly if the factory speakers have degraded over time.
- The radio cavity supports both single DIN and double DIN head unit configurations, allowing flexibility in source unit selection if amplifier preamp outputs or signal processing features are desired for enhanced speaker performance.
- Component speaker systems with separate tweeters would require custom tweeter mounting solutions, as dedicated factory tweeter locations are not indicated in the specifications provided.
- The 5.25 inch format provides a balance between cone area for midrange output and physical fitment within compact door panel constraints typical of smaller vehicles.