2000 Subaru Forester Speaker Sizes
The 2000 Subaru Forester speaker size chart provides factory speaker specifications and locations for OEM audio system components. Information covers replacement and aftermarket upgrade options for front door panel and rear door panel speaker positions, enabling proper fitment when modifying or restoring the audio system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 4 | Midrange |
|
2000 Subaru Forester Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02000 Subaru Forester Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels in the 2000 Subaru Forester accommodate 6.5-inch speakers and accept either midbass or full-range driver configurations, which tends to make them the primary focus for audio system upgrades due to their larger cone area and broader frequency response capabilities.
- Midbass speakers in the front locations would handle frequencies roughly between 80Hz and 2kHz, while full-range drivers would attempt to reproduce both midrange and higher frequencies without requiring separate tweeters, though often with compromises in frequency extension at both ends of the spectrum.
- The rear door panels contain 4-inch speakers designated as midrange types, suggesting they may reproduce frequencies typically between 300Hz and 5kHz, which would complement a system where bass duties are handled primarily by the larger front speakers or a subwoofer.
- Upgrading the front 6.5-inch positions first would likely yield more noticeable improvements in overall sound quality compared to replacing the rear 4-inch midrange speakers, given the front speakers' ability to reproduce lower frequencies and greater output potential.
- The single DIN radio opening in the 2000 Subaru Forester provides a standard-height head unit slot, which limits aftermarket receiver options to single DIN models unless a mounting adapter kit is used to accommodate larger double DIN units.
- Component speaker systems with separate woofers and tweeters could be installed in the front door positions, with the 6.5-inch woofers mounted in the existing locations and tweeters positioned elsewhere in the door or dash area for improved stereo imaging.
- The 4-inch rear speakers might be crossed over at higher frequencies in an aftermarket system to prevent distortion when attempting to reproduce bass content beyond their physical limitations, allowing them to focus on midrange clarity instead.