2006 Subaru Forester Speaker Sizes
The 2006 Subaru Forester speaker size chart displays factory audio system specifications for replacement or aftermarket upgrade purposes. Data includes speaker locations within the vehicle cabin, along with corresponding factory specifications for front door panel, rear door panel, and rear positions. Information assists in identifying compatible aftermarket components when upgrading or replacing factory audio system speakers.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear | 8 | Subwoofer |
|
| Rear Door Panel | 4 | Midrange |
|
2006 Subaru Forester Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 2 Low: 02006 Subaru Forester Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2006 Subaru Forester front door panels accommodate 6.5-inch drivers that can function as either midbass units in component systems or full-range speakers in coaxial configurations, making them the primary candidates for replacement when targeting midrange frequency and vocal clarity improvements.
- Rear door panel speakers measure 4 inches and are designated for midrange reproduction, suggesting these handle vocal frequencies and upper midrange content rather than low-frequency output, which may make them secondary priorities compared to the larger front drivers.
- An 8-inch subwoofer location exists in the rear area, providing dedicated low-frequency reinforcement that typically handles bass content below 80-120 Hz, though aftermarket replacement could extend response and increase output capability.
- The front door speakers likely contribute most significantly to perceived sound quality during typical listening due to their larger cone area and proximity to front passengers, while the smaller rear midrange units primarily fill the rear soundstage.
- Component speaker systems with separate tweeters would typically utilize the 6.5-inch front locations for woofer installation, with tweeters mounted separately in the sail panels or A-pillars to improve high-frequency dispersion and imaging.
- The dual DIN and single DIN radio compatibility provides flexibility for aftermarket head unit installation, which could enable signal processing features like time alignment and equalization to optimize the speaker system's performance.
- Replacing the factory 6.5-inch front speakers with higher-sensitivity aftermarket units could produce noticeable volume increases even with the stock head unit, as factory speakers often range between 86-89 dB sensitivity while aftermarket options frequently exceed 90-92 dB.
- The 4-inch rear midrange speakers may benefit from replacement if rear passenger audio quality matters, though their limited cone area restricts low-frequency extension regardless of aftermarket driver quality.