1995 Subaru Legacy Speaker Sizes
The 1995 Subaru Legacy speaker size chart provides factory speaker specifications and locations for replacement or upgrade purposes. Information covers front door panel and rear door panel positions within the audio system. Data includes factory speaker specifications to assist with selecting compatible aftermarket speakers for installation in the original locations.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
1995 Subaru Legacy Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01995 Subaru Legacy Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1995 Subaru Legacy uses 6.5 inch speakers in both front and rear door panels, which indicates a standardized speaker configuration throughout the cabin. This uniform sizing may simplify replacement planning when upgrading multiple locations simultaneously.
- Both front and rear positions accept either midbass or full-range speaker types. Midbass drivers typically focus on reproducing mid-to-low frequencies with dedicated tweeters handling higher ranges, while full-range speakers attempt to cover the entire audible spectrum through a single cone assembly.
- The door panel locations suggest that factory speakers were likely integrated into the door cards rather than positioned in dashboard or pillar locations. Door-mounted speakers often benefit from the panel's air volume acting as an enclosure, though this can introduce challenges with moisture exposure and panel resonance.
- Upgrading to component systems with separate tweeters and crossovers could potentially improve soundstage and frequency separation compared to full-range replacements. The midbass compatibility suggests adequate mounting depth may exist in the door panels to accommodate speakers with larger magnets and motor structures.
- The single DIN and double DIN radio compatibility indicates the dashboard opening can accommodate either a standard single-height head unit or a taller double-height unit. This flexibility allows for aftermarket receivers with larger displays or additional features without requiring dashboard modification.
- Replacing door panel speakers may require speaker mounting brackets or adapters to properly secure aftermarket units, as the factory mounting points were designed for the original equipment specifications. Wiring adapters might also be necessary depending on the connector type used in the factory harness.