2014 Subaru Legacy Speaker Sizes
The 2014 Subaru Legacy factory audio system features front door panel and rear door panel locations that accommodate 6.5 inch speakers. Compatible types for a sound system replacement and audio upgrade include midbass and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2014 Subaru Legacy Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02014 Subaru Legacy Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels in the 2014 Subaru Legacy accept 6.5 inch speakers that can function as either midbass drivers or full-range units, providing flexibility in component selection based on system design goals.
- Rear door panel locations also accommodate 6.5 inch speakers with the same midbass or full-range compatibility, allowing for consistent driver sizing throughout the cabin.
- Midbass drivers typically handle frequencies from approximately 80 Hz to 2 kHz, focusing on vocal reproduction and lower midrange energy rather than high-frequency extension.
- Full-range speakers attempt to reproduce a broader frequency spectrum within a single driver, though they generally sacrifice some output capability in both bass extension and treble detail compared to component configurations.
- The dual radio compatibility with both single DIN and double DIN head units in the 2014 Subaru Legacy suggests flexibility in aftermarket audio source equipment installation.
- Front door speakers often receive priority during upgrades since they position closer to listeners and typically handle the majority of midrange content where vocals and instrumental detail reside.
- Aftermarket 6.5 inch speakers generally offer power handling ranges from 50 to 150 watts RMS, depending on construction quality and voice coil design.
- Component systems separating tweeters from midbass drivers tend to provide improved staging and frequency response control compared to full-range alternatives, though they require additional mounting considerations.