2007 Subaru Outback Speaker Sizes
The 2007 Subaru Outback speaker size chart displays factory audio system specifications and component locations for replacement or aftermarket upgrade purposes. Information covers front door panel and rear door panel speaker positions with details on factory sizes and compatible aftermarket options. Reference data assists with audio system modifications and installations.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2007 Subaru Outback Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02007 Subaru Outback Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2007 Subaru Outback uses uniform speaker sizing across all door locations, with both front and rear panels accommodating 6.5 inch drivers that can function as either midbass or full-range units.
- Full-range speakers in this configuration would handle the complete frequency spectrum on their own, while midbass drivers would typically require supplementary tweeters to reproduce higher frequencies adequately.
- Door panel speakers often take installation priority since they provide primary sound coverage for most occupants and contribute significantly to overall cabin audio quality.
- The 6.5 inch format represents a middle ground in speaker sizing, offering a balance between bass response capabilities and physical installation constraints within factory mounting locations.
- Aftermarket full-range speakers in this size category typically include integrated tweeters or coaxial designs to maintain treble reproduction without requiring additional components.
- Component speaker systems using dedicated midbass drivers would necessitate separate tweeter mounting, potentially in factory tweeter locations if present or through custom installation points.
- The dual compatibility with both Single DIN and Double DIN radio units provides flexibility for head unit upgrades that could enhance speaker performance through improved amplification and signal processing.
- Replacing factory speakers with aftermarket units of higher sensitivity ratings could yield noticeable volume increases even when using stock amplification from the head unit.