1987 Suzuki Samurai Speaker Sizes
The 1987 Suzuki Samurai speaker size chart provides factory speaker specifications and locations for replacement or aftermarket audio system upgrades. Information includes dashboard and rear speaker positions with corresponding specifications. Data assists in identifying compatible aftermarket speakers that match original factory audio system configurations.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 4 | Midrange |
|
| Rear | 4 | Midrange |
|
1987 Suzuki Samurai Speaker Replacement Summary
2
total positions
0
easy to replace
0
high priority
0
professional only
Replacement difficulty:
Low: 0 Medium: 2 High: 0Replacement priority:
High: 0 Medium: 2 Low: 01987 Suzuki Samurai Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1987 Suzuki Samurai sound system relies on 4-inch speakers in both dashboard and rear positions, suggesting a focus on midrange frequency reproduction rather than full-range audio coverage.
- The speaker configuration lacks dedicated tweeter or woofer positions, which indicates that any upgrade would need to consider component systems or coaxial designs that incorporate multiple driver types within the 4-inch form factor.
- Both front and rear locations accept midrange-type speakers, which typically handle frequencies between approximately 300 Hz and 5 kHz, potentially leaving bass and extreme treble frequencies underrepresented in the factory setup.
- The single DIN radio opening provides standard aftermarket head unit compatibility, allowing for modern source components that can better drive replacement speakers and offer signal processing capabilities not available in the original 1987 Suzuki Samurai equipment.
- The uniform 4-inch size throughout the vehicle could simplify speaker replacement planning, as the same speaker model might work in multiple locations, though mounting depth and impedance specifications would still require verification.
- Aftermarket speaker options in the 4-inch size category often include coaxial designs that integrate tweeters into the speaker assembly, which could expand frequency response beyond what dedicated midrange drivers typically offer.
- The limited speaker size may constrain low-frequency output potential, as smaller drivers generally move less air and produce less bass extension compared to larger woofers, even when power handling is adequate.
- Replacement speaker selection might prioritize sensitivity ratings, since higher sensitivity drivers can produce greater output from the limited power typically available from factory-era head units or modest aftermarket amplifiers.