2019 Tesla 3 Speaker Sizes
The 2019 Tesla Model 3 factory audio system contains specific interior locations. Front doors and rear doors accommodate 6.5 inch speakers. Midbass and full-range units serve as a replacement upgrade.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front | 6.5 | Midbass / Full-Range |
|
| Rear | 6.5 | Midbass / Full-Range |
|
2019 Tesla 3 Speaker Replacement Summary
2
total positions
0
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 0 Medium: 2 High: 0Replacement priority:
High: 1 Medium: 1 Low: 0Additional Notes
- The 2019 Tesla 3 uses 6.5 inch speakers in both front and rear positions, creating a uniform speaker size configuration throughout the cabin.
- These locations accept either midbass drivers or full-range speakers, providing flexibility in component selection based on system design goals.
- Midbass drivers typically focus on frequencies between approximately 80Hz and 500Hz, handling the lower midrange and upper bass portions of the audio spectrum.
- Full-range speakers attempt to reproduce a wider frequency spectrum from a single driver, generally covering midrange and treble frequencies with some bass extension.
- The choice between midbass and full-range speakers often depends on whether a separate tweeter will be installed for high-frequency reproduction.
- Systems using component speakers would pair midbass drivers with separate tweeters, while full-range speakers operate independently without additional high-frequency drivers.
- The 6.5 inch size represents the mounting diameter specification, which determines physical compatibility with the factory speaker locations.
- Replacing factory speakers with aftermarket units of the same size may improve sound quality through enhanced materials, stronger magnet structures, and more efficient voice coil designs.
- The identical sizing front and rear allows for matched speaker sets, which can contribute to more uniform tonal characteristics across listening positions.
- Speaker sensitivity ratings, typically measured in decibels, indicate how efficiently the driver converts electrical power into acoustic output, with higher values generally requiring less amplifier power.