2011 Toyota Matrix Speaker Sizes

Speaker size chart for the 2011 Toyota Matrix detailing factory audio system specifications. Information covers replacement and aftermarket upgrade options across multiple locations including dashboard, front door panel, and rear door panel positions. Data encompasses speaker dimensions and mounting configurations found in OEM installations.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Speaker Details by Location
Location Size Type Notes
Dashboard 2.5 Midrange
  • Requires panel disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

2011 Toyota Matrix Speaker Replacement Summary

3 total positions
2 easy to replace
1 high priority
0 professional only

Replacement difficulty:

Low: 2 Medium: 1 High: 0

Replacement priority:

High: 1 Medium: 2 Low: 0

2011 Toyota Matrix Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The front and rear door panels in the 2011 Toyota Matrix typically accommodate 6.5 inch speakers, which can serve dual purposes as either midbass drivers or full-range units depending on the system configuration.
  • Dashboard locations feature smaller 2.5 inch openings specifically designed for midrange drivers, which handle the critical vocal and instrumental frequencies in the audio spectrum.
  • Replacing the door panel speakers may offer more noticeable improvements in overall sound quality due to their larger size and broader frequency response capabilities compared to the dashboard units.
  • The full-range option for door speakers provides a simpler upgrade path that doesn't require additional crossover components, while midbass configurations might integrate better with aftermarket component systems.
  • Both Single DIN and Double DIN head unit configurations are supported, which could influence the overall system design when planning speaker upgrades alongside receiver replacements.
  • The dashboard midrange speakers likely focus on reproducing the 300Hz to 5kHz range where human hearing is most sensitive, complementing the larger door speakers that handle lower frequencies.
  • Component speaker systems might utilize the 6.5 inch door locations for woofers while incorporating separate tweeters, potentially bypassing or replacing the factory dashboard midrange units.