2013 Toyota Matrix Speaker Sizes
The 2013 Toyota Matrix factory audio system specifies dashboard locations that accept a 2.5 inch speaker size. Front door panel and rear door panel locations accommodate 6.5 inch speakers. Compatible types for replacement and upgrade include midrange, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 2.5 | Midrange |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2013 Toyota Matrix Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 2 Low: 02013 Toyota Matrix Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2013 Toyota Matrix contains three distinct speaker locations with varying sizes and functional roles in the audio system.
- Dashboard speakers measure 2.5 inches and function as midrange drivers, handling mid-frequency content in the audio spectrum.
- Both front and rear door panels accommodate 6.5-inch speakers, offering flexibility between midbass drivers focused on lower frequencies or full-range speakers that reproduce a broader frequency spectrum.
- The dual compatibility of door panel speakers with either midbass or full-range types allows for different upgrade approaches depending on whether the system retains or removes the factory dashboard midrange drivers.
- Replacing door panel speakers would likely provide the most noticeable improvement in overall sound quality due to their larger size and broader frequency capabilities compared to the smaller dashboard units.
- Midbass speakers in the door panels would typically handle frequencies from roughly 80 Hz to 500 Hz, while full-range options could extend from similar bass frequencies up through treble ranges around 20 kHz.
- The dashboard midrange speakers may become redundant if full-range speakers are installed in the door panels, though they could complement a midbass-focused door speaker configuration.
- The radio bay accepts both single DIN and double DIN head units, providing flexibility for aftermarket receiver upgrades that could drive replacement speakers more effectively than factory electronics.
- Aftermarket 6.5-inch speakers generally offer substantial improvements in power handling, sensitivity, and frequency response compared to factory-installed units of the same size.
- Component speaker systems with separate tweeters could be installed in the 6.5-inch door locations, potentially utilizing the dashboard locations for tweeter mounting or leaving them disconnected.