2018 Toyota Sequoia Speaker Sizes

The 2018 Toyota Sequoia speaker size chart provides factory specifications for all audio system locations throughout the vehicle. Information includes replacement and upgrade options for speakers in the front door panel, rear door panel, center dash, dashboard, d-pillar, and rear side panel positions. Aftermarket compatibility details are available for each location.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Speaker Details by Location
Location Size Type Notes
Center Dash 3.5 Full-Range
  • Requires dashboard disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
D-Pillar 3.5 Midrange
  • Extremely difficult access
  • Professional service only
  • Low replacement priority
  • Replacement difficulty: high
Dashboard 3.5 Full-Range
  • Requires panel disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Front Door Panel 0.75 Tweeter
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Front Door Panel 6x9 Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Door Panel 0.75 Tweeter
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low
Rear Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low
Rear Side Panel 8 Woofer
  • Requires trim removal
  • Medium replacement priority
  • Replacement difficulty: medium

2018 Toyota Sequoia Speaker Replacement Summary

8 total positions
4 easy to replace
2 high priority
1 professional only

Replacement difficulty:

Low: 4 Medium: 3 High: 1

Replacement priority:

High: 2 Medium: 4 Low: 2

2018 Toyota Sequoia Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2018 Toyota Sequoia contains multiple speaker locations across different zones, with tweeters positioned in both front and rear door panels at 0.75 inches, suggesting a component-based audio architecture in the factory configuration.
  • Full-range speakers are distributed across three locations including the center dash, dashboard, and front door panels, with the front doors accommodating larger 6x9 inch units while the dash positions utilize smaller 3.5 inch speakers.
  • The rear door panels feature a dual-speaker setup combining 0.75 inch tweeters with 6.5 inch midbass or full-range speakers, indicating a two-way speaker arrangement for rear passengers.
  • Dedicated bass reproduction appears to be handled by 8 inch woofers mounted in the rear side panels, which typically provide extended low-frequency output compared to smaller door-mounted speakers.
  • The D-pillar location contains 3.5 inch midrange speakers, potentially serving as fill or surround speakers to expand the soundstage toward the rear of the cabin.
  • Aftermarket component speaker systems could integrate with the existing tweeter locations in the door panels, though the 0.75 inch size may limit compatibility with certain aftermarket tweeters that typically range from 0.75 to 1 inch.
  • The 6x9 inch front door speakers represent the largest full-range units in the system and would likely provide the most noticeable sound quality improvement when replaced with aftermarket alternatives featuring better cone materials and higher power handling.
  • Both single DIN and double DIN radio configurations are supported in the dash, allowing for aftermarket head unit installations ranging from basic single-height receivers to larger touchscreen models with advanced audio processing capabilities.