1989 Toyota Supra Speaker Sizes
The 1989 Toyota Supra speaker size chart lists factory speaker locations and specifications for replacement or aftermarket upgrade purposes. Information includes front door panel and rear deck lid positions within the audio system. Data assists with identifying compatible aftermarket speakers based on factory specifications and mounting locations throughout the vehicle.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 4 | Midrange |
|
| Rear Deck Lid | 4 | Midrange |
|
1989 Toyota Supra Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01989 Toyota Supra Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1989 Toyota Supra uses 4 inch speakers in both the front door panels and rear deck lid locations, which are classified as midrange drivers rather than full-range coaxial units.
- Midrange speakers in this configuration typically handle frequencies between approximately 300 Hz and 5 kHz, suggesting the factory audio system may have relied on separate tweeters or had limited high-frequency extension.
- Upgrading the rear deck lid speakers could provide noticeable changes to cabin acoustics since rear-mounted drivers contribute to soundstage depth and ambient fill in coupe configurations.
- The 4 inch size constraint limits available power handling and bass response compared to larger drivers, though aftermarket midrange replacements might offer improved sensitivity and frequency linearity.
- Both Single DIN and Double DIN radio compatibility allows flexibility in head unit selection, which could become relevant when pairing upgraded speakers with amplifiers or signal processors requiring preamp outputs.
- Replacing factory midrange speakers with components featuring treated cones or textile domes might reduce distortion at moderate listening levels without requiring additional amplification.