1998 Toyota Tercel Speaker Sizes
The 1998 Toyota Tercel factory audio system features specific mounting locations. Front door panels accommodate 4 inch speakers, and the rear deck lid supports a 6.5 inch speaker size. Compatible speaker types for replacement and upgrade include midrange, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 4 | Midrange |
|
| Rear Deck Lid | 6.5 | Midbass / Full-Range |
|
1998 Toyota Tercel Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01998 Toyota Tercel Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1998 Toyota Tercel features 4-inch front door panel speakers designed for midrange frequencies, which typically handle vocal and instrumental clarity in the 300Hz to 5kHz range rather than deep bass reproduction.
- Rear deck lid speakers in this configuration utilize 6.5-inch drivers capable of midbass or full-range operation, suggesting they handle a broader frequency spectrum including lower frequencies that 4-inch units cannot reproduce effectively.
- Replacing the front door speakers may prioritize midrange clarity improvements, while rear deck speaker upgrades could focus on extending bass response and overall soundstage depth.
- The size disparity between front and rear speakers indicates a factory audio design that relies on larger rear-mounted drivers to compensate for the limited low-frequency output of smaller front units.
- Full-range 6.5-inch speakers in the rear deck position could eliminate the need for separate tweeters in that location, as they typically incorporate integrated high-frequency elements within their cone structure.
- Midbass-type 6.5-inch speakers would require separate high-frequency drivers to maintain treble response if selected for the rear deck, as they focus primarily on frequencies between 80Hz and 1kHz.
- The single or double DIN radio compatibility suggests flexibility in upgrading the head unit to models with enhanced equalization controls that could better balance the output between differently-sized front and rear speakers.
- Aftermarket 4-inch midrange speakers often feature higher sensitivity ratings than factory units, potentially improving volume output without requiring additional amplification in the front stage.