2016 Toyota Yaris Speaker Sizes

The 2016 Toyota Yaris factory audio system features an a-pillar location that accommodates a 1 inch speaker size, while the front door panel and rear door panel support 6.5 inch speakers. Component replacement and audio system upgrade applications support tweeter, midbass, and full-range compatible speaker types.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
A-Pillar 1 Tweeter
  • Requires panel disassembly
  • Professional installation recommended
  • Low replacement priority
  • Replacement difficulty: high
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

2016 Toyota Yaris Speaker Replacement Summary

3 total positions
2 easy to replace
1 high priority
1 professional only

Replacement difficulty:

Low: 2 Medium: 0 High: 1

Replacement priority:

High: 1 Medium: 1 Low: 1

2016 Toyota Yaris Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2016 Toyota Yaris front door panel positions may warrant attention first, given the larger 6.5 inch openings provide more potential for sonic improvement compared to the smaller tweeter locations.
  • The A-pillar locations accommodate 1 inch tweeters, which could complement larger door speakers in a component system configuration.
  • Both front and rear door panels share identical 6.5 inch sizing, potentially simplifying speaker selection if upgrading multiple locations.
  • The door panel positions accept either midbass drivers or full-range speakers, allowing for different system approaches depending on whether tweeters are utilized separately.
  • Full-range speakers in the door locations might offer a simpler installation path, while midbass drivers would typically pair with the A-pillar tweeters for expanded frequency response.
  • The single DIN or double DIN radio compatibility suggests aftermarket head unit installation remains straightforward without dimensional constraints.
  • Upgrading the 6.5 inch door speakers would likely yield the most noticeable improvement in overall audio output and tonal quality.
  • The tweeter positions at the A-pillars place high-frequency drivers closer to ear level, which may benefit imaging characteristics when paired with appropriate door-mounted midbass units.