2011 Volkswagen Tiguan Speaker Sizes
The 2011 Volkswagen Tiguan factory audio system includes front door panel and rear door panel locations that accommodate 6.5 inch speakers. Midbass and full-range units serve as compatible speaker types for an audio replacement and upgrade.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2011 Volkswagen Tiguan Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02011 Volkswagen Tiguan Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2011 Volkswagen Tiguan uses 6.5 inch speakers in both front and rear door panels, accepting either midbass or full-range driver configurations.
- Front door speakers typically take priority during replacement due to their proximity to passengers and greater contribution to overall audio quality in most listening positions.
- Full-range speakers offer a simpler installation path as single-driver solutions covering the entire frequency spectrum, while midbass speakers typically require separate tweeters for high-frequency reproduction.
- Component speaker systems utilizing dedicated midbass drivers in the 6.5 inch locations generally provide better stereo imaging and frequency separation compared to full-range alternatives.
- Both door locations share the same mounting size, potentially allowing for consistent driver selection across all four positions if uniform sound characteristics are desired.
- The radio accepts both single DIN and double DIN head units, providing flexibility for aftermarket upgrades that may include amplification or advanced signal processing capabilities to drive upgraded speakers.
- Midbass drivers in this size range typically handle frequencies from approximately 80Hz to 4kHz, while full-range speakers extend response into the higher frequencies that would otherwise require separate tweeters.
- Factory speaker replacement with aftermarket units of higher sensitivity ratings can produce noticeable volume increases even when powered by the stock head unit.