2020 Chevrolet Tracker Speaker Sizes
The 2020 Chevrolet Tracker factory audio system locations include an a-pillar that accommodates a 1 inch speaker size, while the front door panel and rear door panel accommodate 6.5 inch speakers. Compatible speaker types for audio replacement and upgrade projects consist of tweeters, midbass units, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2020 Chevrolet Tracker Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 1Replacement priority:
High: 1 Medium: 1 Low: 1Additional Notes
- The front and rear door panels of the 2020 Chevrolet Tracker share the same 6.5 inch speaker size, which may suggest that a consistent driver replacement across all four door locations could be possible.
- The A-pillar position is sized for a 1 inch tweeter, which tends to be associated with high-frequency reproduction and is typically separate from the midbass or full-range drivers mounted in the door panels.
- The door panel locations support either midbass or full-range speaker types, meaning the existing setup may allow for either a two-way component configuration or a simpler full-range replacement, depending on what is already installed.
- A two-way or component speaker arrangement could potentially be achieved by pairing the 1 inch A-pillar tweeter with a dedicated 6.5 inch midbass driver in the door panels, which may result in a more defined separation of frequency ranges compared to a full-range-only setup.
- Given that the factory A-pillar tweeter position is a relatively small 1 inch size, aftermarket tweeter compatibility at that location may be worth evaluating before a replacement is pursued.
- The door panel locations, supporting 6.5 inch drivers, are generally considered a higher priority for replacement due to their larger cone area and their role in mid and low-frequency output relative to the smaller tweeter position.