1995 Chrysler Cirrus Speaker Sizes
The 1995 Chrysler Cirrus speaker size chart provides factory and aftermarket audio specifications for replacement or upgrade purposes. Information includes speaker locations within the vehicle, specifically front door panel and rear deck lid positions. Details cover factory-installed system configurations and compatible aftermarket options for audio enhancement.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
1995 Chrysler Cirrus Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01995 Chrysler Cirrus Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels in the 1995 Chrysler Cirrus were designed to accommodate 6.5 inch speakers, which could accept either midbass drivers or full-range units depending on the desired audio configuration and whether a separate tweeter system was being considered.
- Rear deck lid positions received 6x9 inch full-range speakers, a size that was commonly used in this era for rear fill applications due to its ability to reproduce a wider frequency range from a single driver compared to smaller round formats.
- Replacing the factory speakers would likely focus first on the rear deck positions, as 6x9 inch aftermarket speakers typically offered more substantial bass output and overall volume capability compared to the smaller front door units.
- The midbass designation for the front door speakers in the 1995 Chrysler Cirrus suggests these positions might have originally worked in conjunction with separate high-frequency drivers, though full-range replacements could also be installed if a simpler two-way system was preferred.
- Aftermarket speaker selection for this vehicle would need to account for mounting depth and door panel clearance in the front positions, as 6.5 inch drivers varied considerably in their magnet structure depth and basket design among different manufacturers.
- Sound quality improvements from speaker replacement would likely be most noticeable in frequency response extension and dynamic range, particularly if the factory units had deteriorated foam surrounds or weakened suspension components after years of use.
- The single DIN radio opening provided standard compatibility with aftermarket head units, which could provide additional power output to drive upgraded speakers more effectively than the original equipment radio amplifier section.