1995 Chrysler Concorde Speaker Sizes
The 1995 Chrysler Concorde factory audio system incorporates specific locations where the dashboard accepts 3.5 inch units, the front door panel supports a 5.25 inch speaker size, and the rear deck lid accommodates 6x9 inch units. For audio replacement and upgrade projects, full-range and midbass are compatible speaker types.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 3.5 | Full-Range |
|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
1995 Chrysler Concorde Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 2 Low: 01995 Chrysler Concorde Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1995 Chrysler Concorde features three distinct speaker locations with varying sizes, suggesting a factory configuration that prioritizes coverage over dedicated frequency separation.
- Dashboard positions accommodate 3.5 inch full-range speakers, which typically handle mid and high frequencies but may lack low-end output compared to larger drivers.
- Front door panel locations accept 5.25 inch speakers and support both midbass and full-range types, offering flexibility between bass reinforcement or balanced sound reproduction.
- Rear deck lid positions utilize 6x9 inch speakers in full-range configuration, a size often associated with improved bass response relative to smaller formats.
- Replacement might begin with front door speakers given their proximity to passengers and dual-type compatibility, potentially yielding noticeable tonal changes.
- Midbass speakers in the front doors could complement smaller dashboard units by handling lower frequencies that 3.5 inch drivers may reproduce with less authority.
- Full-range speakers in rear positions may contribute to overall sound stage depth, though their effectiveness varies with listener position and cabin acoustics.
- The single DIN radio slot indicates standard head unit dimensions, which may influence power output and equalization options available to aftermarket speakers.
- Speaker sensitivity ratings and power handling become relevant considerations when the factory head unit remains in use, as amplification may be limited.
- Upgrading all three locations could address frequency gaps across the audio spectrum, though results depend on specific speaker characteristics and installation quality.