1995 Chrysler LeBaron Speaker Sizes

The 1995 Chrysler LeBaron speaker size chart provides factory audio system specifications for OEM and aftermarket replacement or upgrade purposes. Information covers speaker locations throughout the vehicle, including dashboard, front door panel, rear door panel, and rear positions. Factory specifications detail the original audio components installed at these locations.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Speaker Details by Location
Location Size Type Notes
Dashboard 3.5 Full-Range
  • Requires panel disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Front Door Panel 5.25 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear 6x9 Full-Range
  • Secondary sound location
  • Medium replacement priority
  • Replacement difficulty: medium
Rear Door Panel 5.25 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

1995 Chrysler LeBaron Speaker Replacement Summary

4 total positions
2 easy to replace
1 high priority
0 professional only

Replacement difficulty:

Low: 2 Medium: 2 High: 0

Replacement priority:

High: 1 Medium: 3 Low: 0

1995 Chrysler LeBaron Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN 7"×2" 180×50 Standard size for basic car radios with small display or no display
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 1995 Chrysler LeBaron contains multiple speaker locations with varying sizes, suggesting a factory audio system designed with distributed sound sources throughout the cabin rather than concentrated in a single area.
  • Dashboard speakers measure 3.5 inches and accept only full-range drivers, which may indicate these positions serve primarily to supplement higher frequency content from a forward staging position.
  • Both front and rear door panels accommodate 5.25-inch speakers with compatibility for either midbass or full-range types, offering flexibility in component selection based on whether a separate tweeter system would be implemented.
  • The rear deck position accepts 6x9 inch speakers in full-range configuration, which typically provides broader frequency response and higher output capability compared to the smaller door-mounted units.
  • Replacing the dashboard speakers might be considered lower priority given their limited size and full-range-only specification, while the door and rear locations could offer more substantial improvements to overall system performance.
  • Full-range speakers at all locations suggest the factory system was configured without dedicated tweeters or crossover networks, operating each driver across its entire capable frequency spectrum.
  • The door panel positions in the 1995 Chrysler LeBaron support midbass drivers, which could allow for a component speaker upgrade path where dedicated tweeters handle high frequencies separately from the door-mounted woofers.
  • The single DIN radio opening follows period-standard head unit sizing, which would accommodate most aftermarket receivers without requiring additional mounting adapters or modifications beyond standard installation hardware.
  • Sound improvement potential may be greatest at the 6x9 inch rear position and the door-mounted 5.25-inch locations, where larger cone area and power handling could be utilized compared to the more limited dashboard speakers.