1998 Chrysler Cirrus Speaker Sizes
The 1998 Chrysler Cirrus factory audio system contains a front door panel location to accommodate 6.5 inch speakers and a rear deck lid location to support a 6x9 inch speaker size. Midbass and full-range units serve as compatible speaker types for sound system replacement and upgrade.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
1998 Chrysler Cirrus Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01998 Chrysler Cirrus Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels in the 1998 Chrysler Cirrus accommodate speakers with a 6.5 inch mounting pattern, providing options for either midbass drivers or full-range units depending on the desired audio configuration.
- Midbass speakers tend to focus on reproducing lower mid-frequencies with greater authority, while full-range speakers attempt to cover a broader frequency spectrum through a single driver design.
- The rear deck lid positions accept 6x9 inch speakers designated for full-range operation, which represents a different form factor compared to the circular front mounting locations.
- Oval 6x9 speakers typically offer increased cone surface area relative to round 6.5 inch drivers, potentially contributing to enhanced bass response in rear listening positions.
- Upgrading the front door speakers may take priority over rear deck replacements for listeners seated in forward positions, as proximity to the drivers influences perceived sound stage and clarity.
- The single DIN radio specification indicates a standard head unit size, which maintains compatibility with various aftermarket receivers should electrical audio upgrades be considered.
- Full-range speakers installed in both locations would create a simpler system architecture without requiring additional crossover components or separate tweeters for high-frequency reproduction.
- Component speaker systems featuring separate tweeters could be installed in the front doors if the midbass configuration is selected, though this would require suitable tweeter mounting locations within the cabin.