1986 Dodge Ramcharger Speaker Sizes
The 1986 Dodge Ramcharger speaker size chart provides factory specifications and locations for audio system components. Information includes speaker positions in the front door panel and rear areas. Data assists with identifying replacement or aftermarket upgrade options based on original equipment specifications for audio system modifications.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6x9 | Full-Range |
|
| Rear | 5.25 | Midbass / Full-Range |
|
1986 Dodge Ramcharger Speaker Replacement Summary
2
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01986 Dodge Ramcharger Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1986 Dodge Ramcharger uses two different speaker sizes between front and rear locations, with 6x9 inch speakers mounted in the front door panels and 5.25 inch speakers positioned in the rear. This configuration suggests the front door panels were designed to accommodate larger oval speakers while the rear mounting points accept smaller round units.
- Front door panel speakers in this configuration may handle a broader frequency range due to their larger surface area, while the rear 5.25 inch speakers could serve as supplemental fill for the audio system. Both locations support full-range speaker types, though the rear position also accepts midbass drivers if a component system configuration is desired.
- Replacing factory speakers with aftermarket full-range models could provide improved frequency response and power handling over original equipment. The front 6x9 position typically receives priority in replacements since these speakers often carry more of the system's sound output in vehicles from this era.
- Single DIN radio compatibility in the 1986 Dodge Ramcharger allows for aftermarket head unit installation without additional mounting adapters in most cases. A head unit with higher RMS output might better drive aftermarket speakers compared to period-correct factory radios.
- Component speaker systems could theoretically be installed in the rear 5.25 inch locations using midbass drivers, though this would require separate tweeter mounting locations and crossover installation. The front 6x9 positions would typically remain full-range in such a configuration due to the oval form factor's limitations with component separation.
- Speaker depth and mounting bracket clearance would need verification before replacement, as door panel thickness and window mechanisms can restrict aftermarket speaker installation even when diameter matches factory specifications.