1986 Ford Bronco Speaker Sizes
The 1986 Ford Bronco factory audio system features specific locations for sound reproduction. Front door panels accept 6.5 inch speakers, while rear door panels accommodate 6x8 inch units. Selecting proper replacement and upgrade options involves matching midbass and full-range compatible types to the designated locations.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6x8 | Full-Range |
|
1986 Ford Bronco Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01986 Ford Bronco Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1986 Ford Bronco front door panels accommodate 6.5 inch speakers, which may serve as dedicated midbass drivers or full-range units depending on system configuration. Midbass drivers typically handle frequencies from approximately 80 Hz to 500 Hz, providing punch and body to the lower midrange, while full-range speakers attempt to reproduce the entire audible spectrum from a single cone.
- Rear door panel locations in this vehicle accept 6x8 inch speakers designated for full-range operation. The oval form factor offers increased cone area compared to round 6.5 inch speakers, potentially extending low-frequency response by several hertz and improving overall output capability in the rear soundstage.
- Aftermarket speaker installations for the 1986 Ford Bronco might prioritize front door replacements initially, as front soundstage typically contributes more significantly to perceived audio quality and imaging for front-seat occupants. Rear speakers often function as fill or ambience sources rather than primary reproduction elements.
- The single DIN radio opening allows for head unit upgrades that can provide amplified power output beyond factory specifications, potentially ranging from 18 to 22 watts RMS per channel in aftermarket units. Increased amplifier power may improve dynamic range and reduce distortion when driving replacement speakers at moderate to high volumes.
- Component speaker systems could be installed in the front positions, utilizing the 6.5 inch mounting location for woofers while adding separate tweeters elsewhere in the door or dash area. This configuration separates frequency reproduction duties and may enhance high-frequency detail and overall tonal balance compared to coaxial full-range designs.