2013 Fiat 500 Speaker Sizes
The 2013 Fiat 500 speaker size chart provides factory specifications for replacement and aftermarket audio components. Information includes speaker locations in the front door panel and rear door panel positions. Details cover factory system specifications to assist with audio upgrade planning and aftermarket compatibility verification.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2013 Fiat 500 Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02013 Fiat 500 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2013 Fiat 500 uses identical 6.5 inch speakers in both front and rear door panels, which could simplify the replacement process when upgrading the audio system.
- Both front and rear locations accept either midbass or full-range speaker types, offering flexibility in system configuration based on whether a separate tweeter setup is planned.
- Full-range speakers in these positions would handle the entire frequency spectrum independently, while midbass drivers would typically pair with separate tweeters for high-frequency reproduction.
- The door panel locations suggest factory mounting provisions are likely designed around the 6.5 inch standard, potentially requiring minimal modification during aftermarket installation.
- Upgrading all four door speakers to matched components could provide consistent sound staging and tonal balance throughout the cabin environment.
- The compatible speaker types indicate the factory configuration may vary between trim levels, with some using full-range drivers and others potentially employing component setups.
- Midbass-focused replacements in these locations would typically reproduce frequencies from roughly 80Hz to 4kHz, while full-range options would extend into higher frequency ranges.
- The uniformity of speaker sizing across all door positions may reflect space constraints within the compact vehicle architecture while maintaining audio coverage.