1973 Ford Bronco Speaker Sizes
The 1973 Ford Bronco factory audio system locations include front door panels that accommodate 6.5 inch speakers, and rear door panels that support 6x8 inch units, establishing a baseline speaker size of 6.5 inch for front applications. Midbass and full-range driver types serve as optimal components for replacement and upgrade procedures within the vehicle cabin.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6x8 | Full-Range |
|
1973 Ford Bronco Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01973 Ford Bronco Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1973 Ford Bronco front door panels accommodate 6.5-inch speakers, which can function as either midbass drivers or full-range units depending on the system configuration and crossover settings employed.
- Rear door panels accept 6x8-inch full-range speakers, providing a different size format than the front locations, which may require attention during component selection.
- Full-range speakers in the front positions would handle the entire frequency spectrum independently, while midbass drivers would typically work alongside separate tweeters for higher frequencies.
- The oval 6x8-inch rear configuration tends to offer different dispersion characteristics compared to round speakers, affecting sound coverage patterns in the listening space.
- Replacing factory speakers with aftermarket components could potentially improve tonal balance, dynamic range, and overall clarity given the advancements in voice coil materials and cone technologies.
- The single DIN radio opening provides compatibility with a wide range of head units, allowing for integration of speakers with modern amplifier output capabilities.
- Midbass-focused front speakers paired with rear full-range units would create a distributed frequency approach, though careful amplification levels might be needed to maintain coherent staging.
- Speaker sensitivity ratings become relevant when matching components to available power, as higher sensitivity models require less amplifier output to achieve comparable volume levels.