2014 GMC Terrain Speaker Sizes
The 2014 GMC Terrain speaker size chart provides factory specifications for replacement or aftermarket audio system components. Information includes speaker locations within the front door panel and rear door panel, along with corresponding specifications for each position. This data assists in identifying compatible upgrade options that match the original factory audio system configuration.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear Door Panel | 5.25 | Midbass / Full-Range |
|
2014 GMC Terrain Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02014 GMC Terrain Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2014 GMC Terrain utilizes a uniform 5.25-inch speaker configuration across both front and rear door panels, which may simplify replacement procedures when upgrading multiple locations simultaneously.
- Both door panel positions accept either midbass drivers or full-range speakers, suggesting flexibility in system configuration depending on whether a dedicated subwoofer is present or planned.
- Factory speakers in door panel locations often lack the excursion capabilities and frequency response of aftermarket alternatives, potentially making these positions primary candidates for upgrades seeking enhanced vocal clarity and midrange detail.
- The 5.25-inch form factor typically offers a balance between cone area for adequate bass response and installation depth requirements, which could be relevant given the space constraints in many door panel environments.
- Midbass-specific speakers in these locations would likely focus on frequency reproduction between approximately 60Hz and 500Hz, while full-range options would extend response upward into treble frequencies, eliminating the need for separate tweeters if factory tweeter locations are absent or difficult to access.
- The single DIN and double DIN radio compatibility indicates standard aftermarket head unit installation options are available, which could enable higher power output to upgraded door speakers compared to factory amplification.
- Upgrading to component speakers rather than coaxial designs in the door locations might provide improved soundstage imaging through separate tweeter placement, though this depends on available mounting locations and crossover integration.