2014 GMC Yukon Speaker Sizes
The 2014 GMC Yukon factory audio system features specific mounting positions for 1 inch units in the a-pillar and 3.5 inch units in the dashboard. Front door panels and rear door panels accommodate 6.5 inch speakers. Compatible speaker types for a sound system replacement and audio upgrade include tweeter, full-range, and midbass.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Dashboard | 3.5 | Full-Range |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2014 GMC Yukon Speaker Replacement Summary
4
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 1Replacement priority:
High: 1 Medium: 2 Low: 12014 GMC Yukon Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels in the 2014 GMC Yukon typically house the primary sound drivers, making these 6.5 inch locations a natural starting point for audio enhancement efforts.
- Factory installations often place tweeters in the A-pillar positions, where 1 inch units can project high frequencies across the cabin at ear level.
- Full-range drivers in the dashboard location may handle mid-to-high frequency reproduction, though their 3.5 inch size constrains lower frequency output.
- Both front and rear door panels accept identical 6.5 inch speakers, which allows for consistent midbass response throughout the cabin when using matched component sets.
- The dual-size radio compatibility suggests flexibility for aftermarket head unit installation, with either single DIN or double DIN configurations fitting the factory opening.
- Midbass-capable speakers in the door locations could provide improved low-end response compared to full-range alternatives, particularly when paired with dedicated tweeters in the A-pillar positions.
- The A-pillar tweeter placement may create a soundstage that positions audio imaging at or near windshield height, potentially enhancing spatial characteristics.
- Replacing door panel speakers while retaining factory dashboard units might create tonal imbalances, as the 3.5 inch full-range drivers may not match the output capabilities of upgraded 6.5 inch components.