2007 Honda Fit Speaker Sizes
The 2007 Honda Fit speaker size chart provides factory speaker specifications for replacement and aftermarket audio system upgrades. Information includes sizes and locations for front door panel and rear door panel speakers. Data covers OEM specifications to assist with identifying compatible aftermarket audio components for factory system upgrades.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2007 Honda Fit Speaker Replacement Summary
3
total positions
3
easy to replace
2
high priority
0
professional only
Replacement difficulty:
Low: 3 Medium: 0 High: 0Replacement priority:
High: 2 Medium: 1 Low: 02007 Honda Fit Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2007 Honda Fit features a front door panel configuration with separate mounting locations for tweeters and larger speakers, suggesting a component-ready setup where high-frequency reproduction can be handled by dedicated 1-inch drivers while mid and low frequencies utilize the 6.5-inch positions.
- Factory speaker replacement in this configuration would likely prioritize the 6.5-inch front door locations first, as these handle the bulk of the audible frequency spectrum and contribute most significantly to overall sound quality when equipped with midbass or full-range drivers.
- The rear door panel 6.5-inch locations provide consistent sizing throughout the cabin, which may simplify replacement procedures when upgrading to aftermarket speakers since the same speaker model could potentially be used in multiple positions.
- Component speaker systems featuring separate tweeters and midbass drivers could integrate directly into the 2007 Honda Fit's factory mounting points without requiring custom modifications, as the 1-inch tweeter location appears designed to accommodate high-frequency components distinct from the primary drivers.
- Full-range speakers in the 6.5-inch positions would handle both mid and high frequencies from a single driver, while midbass-specific designs would require the 1-inch tweeter locations to remain functional or be populated with aftermarket tweeters to maintain proper frequency coverage.
- Sound improvement potential appears greatest when addressing the front door panel locations, as these typically receive more power from the head unit and contribute more directly to the listening experience compared to rear fill speakers.
- The single DIN and double DIN radio compatibility offers flexibility in head unit replacement, with double DIN units providing potentially more features and controls while single DIN installations could free up dashboard space for storage pockets or other accessories.