2007 Honda Odyssey Speaker Sizes

The 2007 Honda Odyssey speaker size chart provides factory specifications for replacement and aftermarket audio system components. Information covers locations including dashboard, below seats, front door panel, and rear door panel. Specifications support upgrade planning for drivers seeking to replace factory speakers with aftermarket options.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Speaker Details by Location
Location Size Type Notes
Below Seats 5.25 Midbass / Full-Range
  • Very limited height clearance
  • Medium replacement priority
  • Replacement difficulty: medium
Dashboard 1 Tweeter
  • Requires panel disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Front Door Panel 5.25 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Door Panel 5.25 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

2007 Honda Odyssey Speaker Replacement Summary

4 total positions
2 easy to replace
1 high priority
0 professional only

Replacement difficulty:

Low: 2 Medium: 2 High: 0

Replacement priority:

High: 1 Medium: 3 Low: 0

2007 Honda Odyssey Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2007 Honda Odyssey contains dashboard tweeters at 1 inch, which may benefit from replacement to enhance upper frequency response and vocal clarity throughout the cabin.
  • Factory tweeters often use paper or basic materials that deteriorate over time, whereas aftermarket units typically feature silk or metal domes that could provide crisper highs and better dispersion.
  • The 5.25 inch locations below the seats, front doors, and rear doors accept either midbass drivers or full-range speakers, allowing flexibility in system design depending on whether separate tweeters are used.
  • Midbass speakers focus on mid-to-low frequencies and require pairing with tweeters, while full-range speakers handle the entire frequency spectrum independently but may lack the detail of a component setup.
  • The below-seat positioning of 5.25 inch speakers in the 2007 Honda Odyssey might limit high-frequency clarity due to obstruction, suggesting that component systems with dedicated tweeters could deliver superior soundstage imaging.
  • Replacing door panel speakers tends to produce the most noticeable sound improvement since these locations typically handle the majority of sonic output and benefit from proximity to listeners.
  • Aftermarket speakers with higher sensitivity ratings could extract more volume from factory head units without requiring amplification, though power handling specifications should still match available wattage.
  • The single DIN and double DIN radio compatibility indicates potential for upgrading the head unit to support modern features like higher preamp voltage, which would drive aftermarket speakers more effectively.
  • Polypropylene or treated cloth cones generally withstand humidity and temperature variations better than factory paper cones, potentially extending speaker lifespan in automotive environments.
  • Component separates with external crossovers might offer frequency tuning advantages over coaxial designs, though installation complexity increases with the need to mount tweeters and route additional wiring.