1989 Jeep Wrangler Speaker Sizes
The 1989 Jeep Wrangler factory audio system features dashboard locations that accommodate 4x6 inch units, while overhead locations accept 5.25 inch speakers. Specific replacement and upgrade options include full-range and midbass units, establishing a 4x6 inch speaker size for standard installations.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 4x6 | Full-Range |
|
| Overhead | 5.25 | Midbass / Full-Range |
|
1989 Jeep Wrangler Speaker Replacement Summary
2
total positions
0
easy to replace
0
high priority
1
professional only
Replacement difficulty:
Low: 0 Medium: 1 High: 1Replacement priority:
High: 0 Medium: 1 Low: 11989 Jeep Wrangler Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1989 Jeep Wrangler dashboard locations tend to accommodate 4x6 inch full-range speakers, which may benefit from upgrades that provide clearer vocal reproduction and better high-frequency response than factory units.
- Overhead positions accept 5.25 inch speakers that can function as either midbass or full-range drivers, offering flexibility in system design depending on whether dedicated amplification is planned.
- Full-range speakers in the dashboard location might serve as the primary audio source when overhead positions remain empty or when a simple two-speaker configuration is preferred.
- Midbass-specific drivers in the 5.25 inch overhead locations could complement component tweeters mounted elsewhere, though this would require additional installation work beyond stock configurations.
- The overhead speaker placement potentially provides better sound staging than dashboard-only configurations, as elevated positioning can improve off-axis listening in open-air driving conditions.
- Single DIN radio compatibility allows for aftermarket head units with built-in amplification or preamp outputs, which may drive upgraded speakers more effectively than original equipment.
- Sound improvement from speaker replacement in both locations likely depends on addressing environmental challenges such as wind noise and lack of acoustic enclosure typical in open-top vehicles.
- The 4x6 inch format presents somewhat limited aftermarket options compared to round speakers, though quality manufacturers still produce units designed for this factory opening.