2014 Kia Sedona Speaker Sizes
The 2014 Kia Sedona factory audio system locations accept specific components, ensuring the a-pillar accommodates a 1 inch speaker size, while the center dash accommodates 4 inch units. Front door panels and one set of rear side panels support 6.5 inch speakers, and remaining rear side panels accept 6x9 inch units. Compatible speaker types for replacement or upgrade procedures include tweeter, midrange, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Center Dash | 4 | Midrange |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 6x9 | Full-Range |
|
2014 Kia Sedona Speaker Replacement Summary
5
total positions
1
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 1 Medium: 3 High: 1Replacement priority:
High: 1 Medium: 1 Low: 32014 Kia Sedona Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2014 Kia Sedona features a multi-component speaker configuration with dedicated tweeters mounted in the A-pillars, suggesting a factory setup designed for improved high-frequency dispersion and soundstage width.
- Front door panels accommodate 6.5-inch speakers compatible with both midbass and full-range drivers, indicating these locations likely serve as the primary sound source and may benefit most from aftermarket upgrades.
- A center dashboard location houses a 4-inch midrange speaker, which typically handles vocal and instrumental frequencies and could enhance clarity when replaced with higher-quality components.
- Rear seating areas include two different speaker options: 6.5-inch locations and 6x9-inch locations, both in the side panels, providing flexibility in replacement strategy depending on desired rear fill characteristics.
- The 6x9-inch rear speakers support only full-range drivers, while the 6.5-inch rear positions accept both midbass and full-range types, offering different tonal balance possibilities for the rear soundstage.
- Component speaker systems could take advantage of the existing tweeter locations in the A-pillars, potentially eliminating the need for surface-mounted tweeters during aftermarket installations.
- The radio opening accepts both single DIN and double DIN head units, allowing flexibility in aftermarket receiver selection without requiring extensive dashboard modifications.