2015 Kia Sedona Speaker Sizes
The 2015 Kia Sedona factory audio system dashboard and center dash accommodate 1 inch speakers and 4 inch speakers respectively, while front door panel and rear side panel locations accept a 6.5 inch speaker size. Compatible speaker types for a system replacement and upgrade consist of tweeters, midrange, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Center Dash | 4 | Midrange |
|
| Dashboard | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 6.5 | Midbass / Full-Range |
|
2015 Kia Sedona Speaker Replacement Summary
4
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 3 High: 0Replacement priority:
High: 1 Medium: 2 Low: 12015 Kia Sedona Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels in the 2015 Kia Sedona contain 6.5 inch speakers that accept either midbass or full-range types, suggesting these locations may handle the primary frequency reproduction for front passengers.
- Dashboard tweeters at 1 inch could extend high-frequency response when paired with larger speakers, potentially creating a more complete sonic spectrum than factory configurations typically provide.
- Rear side panels accommodate the same 6.5 inch midbass or full-range speakers as the front doors, which might allow for consistent sound character throughout the cabin when matching components are installed.
- The center dash position houses a 4 inch midrange speaker that likely fills the frequency gap between the dashboard tweeters and the larger door-mounted drivers.
- Component speaker systems with separate tweeters and midbass drivers could utilize the existing 1 inch and 6.5 inch locations, potentially offering improved staging compared to full-range speakers alone.
- Replacing the 6.5 inch door speakers may produce the most noticeable sonic impact since these positions typically reproduce the majority of musical content in most factory audio systems.
- The radio cavity accepts both single DIN and double DIN head units, which could allow integration of source units with higher voltage preamp outputs to drive aftermarket speakers more effectively.
- Aftermarket tweeters designed for 1 inch mounting points could offer higher power handling and extended frequency response compared to factory units, particularly when paired with upgraded midbass drivers in the doors.