2010 Mercedes-Benz CLS550 Speaker Sizes
The 2010 Mercedes-Benz CLS550 factory audio system features front door panel and rear door panel locations that accommodate 6.5 inch speakers. Midbass and full-range units function as compatible speaker types during a replacement or upgrade procedure.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2010 Mercedes-Benz CLS550 Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02010 Mercedes-Benz CLS550 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2010 Mercedes-Benz CLS550 features uniform 6.5 inch speaker openings in both front and rear door panels, which may simplify the process of selecting replacement components when upgrading the audio system.
- Both midbass and full-range speaker types are compatible with the door panel locations, potentially offering flexibility in choosing between dedicated frequency-specific drivers or single-cone solutions depending on the existing system configuration.
- Door panel speakers in the 2010 Mercedes-Benz CLS550 might benefit from component speaker installations that separate tweeters from woofers, though full-range options could provide a more straightforward replacement approach without requiring additional mounting considerations.
- The radio supports both single DIN and double DIN head unit installations, which could influence aftermarket upgrade paths if the audio source component requires replacement alongside or instead of the speakers.
- Replacement speakers for the door locations would likely need to account for mounting depth and impedance characteristics specific to the factory amplifier configuration, if one is present in the vehicle.
- The consistent 6.5 inch sizing across all door positions may indicate that the factory system relies on other locations for high-frequency reproduction, possibly through separate tweeter installations not listed in these specifications.