2013 Mercedes-Benz ML63 AMG Speaker Sizes

The 2013 Mercedes-Benz ML63 AMG factory audio system contains specific factory locations for audio components. Front door panel and rear door panel locations accept a 6.5 inch speaker size alongside separate 1 inch units. Compatible speaker types for a replacement upgrade project include tweeters, midbass, and full-range units.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
Front Door Panel 1 Tweeter
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low
Rear Door Panel 1 Tweeter
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

2013 Mercedes-Benz ML63 AMG Speaker Replacement Summary

4 total positions
4 easy to replace
2 high priority
0 professional only

Replacement difficulty:

Low: 4 Medium: 0 High: 0

Replacement priority:

High: 2 Medium: 2 Low: 0

Additional Notes

  • The 2013 Mercedes-Benz ML63 AMG factory audio configuration includes separate tweeter and larger driver locations in both front and rear door panels, suggesting a component speaker layout rather than a coaxial design.
  • The 1-inch tweeter locations in all four doors indicate that aftermarket component speaker sets with separate tweeters could integrate into the existing mounting points without requiring custom installations.
  • The 6.5-inch driver positions in the door panels accommodate either midbass or full-range speakers, providing flexibility in selecting aftermarket speakers based on whether the factory amplifier and tweeter locations are retained or replaced.
  • Replacing the door panel speakers may offer improvements in clarity and frequency response, particularly if midbass drivers with higher sensitivity ratings or enhanced low-frequency extension are selected.
  • The separate tweeter and midbass locations suggest that the factory system likely employs passive or active crossovers to divide frequencies between the drivers, which may influence aftermarket speaker selection and crossover configuration.
  • Component speakers designed for the 6.5-inch and 1-inch locations could provide better stereo imaging and soundstage than coaxial alternatives, since the tweeter and woofer can be positioned independently within the door panel assembly.