1995 Mitsubishi Mirage Speaker Sizes
The 1995 Mitsubishi Mirage speaker size chart provides factory specifications for OEM audio system components and replacement aftermarket options. Information includes speaker locations in the dashboard, front door panel, and rear deck lid areas. Details cover factory configurations and available aftermarket upgrade specifications for each position within the audio system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 4 | Midrange |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
1995 Mitsubishi Mirage Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 2 Low: 01995 Mitsubishi Mirage Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1995 Mitsubishi Mirage features a three-location speaker arrangement with varying sizes that suggest a tiered upgrade approach based on listening priorities and component availability.
- Dashboard speakers at 4 inches are designated for midrange frequencies, indicating they handle vocal clarity and instrumental definition rather than bass response or full-spectrum audio.
- Front door panel positions accommodate 6.5-inch speakers with compatibility for both midbass and full-range types, offering flexibility in system configuration depending on whether the dashboard and rear speakers remain functional.
- Midbass speakers in the front doors would typically focus on lower-midrange frequencies between roughly 80-500 Hz, complementing dedicated midrange units elsewhere in the system.
- Full-range speakers in the front door positions could potentially operate as standalone units if dashboard or rear speakers are non-functional or removed from the audio path.
- Rear deck lid speakers at 6x9 inches support only full-range types, suggesting they're intended to reproduce a broad frequency spectrum without requiring additional component pairing.
- The 6x9 size generally provides greater surface area than round 6.5-inch speakers, potentially offering increased output in the lower frequencies despite not being classified as dedicated subwoofers.
- Prioritizing front door replacements may yield more noticeable improvements for front-seat passengers, as these speakers sit closer to primary listening positions than rear deck units.
- The single DIN radio opening limits aftermarket head unit options to standard-depth models or requires additional mounting adapters for double DIN touchscreen receivers.
- Replacing dashboard midrange speakers could enhance vocal intelligibility and clarity in the upper-midrange frequencies where much musical and spoken content resides.
- A staged upgrade path might address the most degraded or lowest-performing speakers first, which in aging vehicles often means door-mounted units exposed to moisture and temperature variations.
- Full-range rear deck speakers would need to balance highs, mids, and lows within a single driver design, potentially making them less specialized than component systems but simpler to install.