1995 Nissan 200SX Speaker Sizes
The 1995 Nissan 200SX speaker size chart provides factory speaker specifications and locations for replacement or aftermarket audio system upgrades. Information includes speakers installed in front door panel locations and rear deck lid positions. Data covers factory specifications to assist with identifying compatible aftermarket speakers for audio system upgrades or replacements.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6.5 | Midbass / Full-Range |
|
1995 Nissan 200SX Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01995 Nissan 200SX Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1995 Nissan 200SX positions front door panels as a typical starting point for speaker upgrades, as these locations often provide the most noticeable impact on sound quality during regular listening conditions.
- Both front and rear positions accept 6.5 inch speakers with midbass or full-range configurations, which suggests flexibility in choosing between dedicated midbass drivers for component systems or standalone full-range units.
- Full-range speakers in these locations would handle the entire frequency spectrum independently, while midbass speakers would typically require separate tweeters to reproduce higher frequencies adequately.
- The rear deck lid placement may contribute to soundstage depth and fill, though front-stage imaging generally receives more attention in audio system upgrades.
- Component speaker systems with separate tweeters and midbass drivers could potentially offer improved frequency separation compared to full-range alternatives in the 1995 Nissan 200SX.
- The uniform 6.5 inch sizing across front and rear locations may simplify parts selection when planning matched speaker sets throughout the cabin.
- Aftermarket speaker selection would likely focus on sensitivity ratings and power handling capabilities that align with the available amplifier output from either factory or aftermarket head units.
- The single DIN and double DIN radio compatibility indicates potential for head unit upgrades that could drive improved speakers with greater power and signal clarity.