1995 Nissan 240SX Speaker Sizes

The 1995 Nissan 240SX speaker size chart provides factory specifications for OEM and aftermarket audio system components. Information includes replacement speaker locations in the a-pillar, front door panel, and rear deck lid. Data covers factory sizes and aftermarket upgrade options for audio system speakers in designated mounting positions throughout the vehicle.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Speaker Details by Location
Location Size Type Notes
A-Pillar 1 Tweeter
  • Requires panel disassembly
  • Professional installation recommended
  • Low replacement priority
  • Replacement difficulty: high
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Deck Lid 6.5 Midbass / Full-Range
  • Access through trunk
  • Medium replacement priority
  • Replacement difficulty: low

1995 Nissan 240SX Speaker Replacement Summary

3 total positions
2 easy to replace
1 high priority
1 professional only

Replacement difficulty:

Low: 2 Medium: 0 High: 1

Replacement priority:

High: 1 Medium: 1 Low: 1

1995 Nissan 240SX Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The front door panels in the 1995 Nissan 240SX accept 6.5 inch speakers, which can accommodate either midbass drivers or full-range units depending on the audio system configuration.
  • Tweeters measuring 1 inch fit into the A-pillar locations, providing dedicated high-frequency reproduction when paired with separate midbass drivers in a component speaker setup.
  • The rear deck lid positions support 6.5 inch speakers, offering similar installation possibilities as the front doors with either midbass or full-range speaker options.
  • Component speaker systems with separate tweeters and midbass drivers could take advantage of both the A-pillar tweeter locations and the door panel speaker positions for improved soundstage and frequency separation.
  • Full-range speakers installed in the door panels would handle the entire frequency spectrum from a single driver, while the A-pillar tweeter locations might remain unused or supplemented later.
  • The radio opening in the 1995 Nissan 240SX accommodates both single DIN and double DIN head units, providing flexibility for aftermarket stereo installations with varying feature sets and display sizes.
  • Midbass drivers in the 6.5 inch locations would typically handle midrange and low frequencies, relying on the A-pillar tweeters to reproduce higher frequencies in a component configuration.
  • The matching 6.5 inch size between front and rear speaker locations allows for consistent driver selection throughout the vehicle when replacing factory speakers.