1996 Nissan 240SX Speaker Sizes
The 1996 Nissan 240SX factory audio system includes an a-pillar location that accommodates a 1 inch speaker size, while front door panel and rear deck lid locations both support 6.5 inch speakers. Compatible speaker types for a system replacement and audio upgrade include tweeter, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6.5 | Midbass / Full-Range |
|
1996 Nissan 240SX Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 1Replacement priority:
High: 1 Medium: 1 Low: 11996 Nissan 240SX Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1996 Nissan 240SX utilizes a three-location speaker configuration with tweeters mounted in the a-pillars and larger drivers positioned in both front and rear locations.
- Factory speaker positions accept 1-inch tweeters in the a-pillar mounting locations, while 6.5-inch drivers fit in both the front door panels and rear deck lid.
- Both front and rear 6.5-inch locations accommodate either midbass drivers or full-range speakers, allowing flexibility in component system design or coaxial speaker installation.
- The a-pillar tweeter locations may become a priority consideration when installing component speaker systems, as these positions could be repurposed for aftermarket tweeters included with component sets.
- Component speaker systems would typically utilize the front door panel locations for the midbass drivers while the included tweeters could mount in the existing a-pillar positions.
- The rear deck lid accepts the same 6.5-inch size as the front doors, which could simplify speaker selection when matching front and rear output.
- Both single DIN and double DIN head units are compatible with the radio opening, providing options for aftermarket receivers with varying feature sets and power output capabilities.
- Upgrading from the factory speakers to aftermarket midbass drivers in the door panels could improve lower frequency response and overall clarity in the front soundstage.
- Full-range speakers in the 6.5-inch positions would handle the entire frequency spectrum at each location, while midbass drivers would require separate tweeters for high-frequency reproduction.
- The existing a-pillar tweeter locations provide high-frequency output closer to ear level, which may contribute to imaging characteristics when used with front component systems.