2010 Nissan Cube Speaker Sizes
The 2010 Nissan Cube factory audio system features specific locations that accept various audio components. The a-pillar accommodates a 1 inch speaker size, while the front door panel and rear door panel support 6.5 inch speakers, and the rear accepts 8 inch units. Selecting proper replacement or upgrade options involves matching compatible types such as tweeter, midbass, full-range, and subwoofer.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear | 8 | Subwoofer |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2010 Nissan Cube Speaker Replacement Summary
4
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 1Replacement priority:
High: 1 Medium: 2 Low: 12010 Nissan Cube Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2010 Nissan Cube factory audio setup includes dedicated tweeters in the A-pillars, which suggests that upgrading the front door speakers might yield better results if component speakers are selected rather than coaxial units, as the tweeter locations are already established.
- Both front and rear door panels accommodate 6.5 inch speakers that can handle either midbass drivers or full-range speakers, providing flexibility in component system design or coaxial speaker selection depending on whether the A-pillar tweeters are retained or replaced.
- The rear 8 inch subwoofer location could allow for enhanced low-frequency output without requiring custom enclosure fabrication, though the depth and mounting configuration would need verification before selecting a replacement driver.
- With both Single DIN and Double DIN radio compatibility, the head unit replacement options are relatively open, which could facilitate integration of amplifiers or digital signal processors if a more substantial audio upgrade is planned beyond speaker replacement alone.
- The presence of separate tweeter locations and the relatively common 6.5 inch door speaker size means that aftermarket component speaker systems designed for this size range would likely integrate with minimal modification to the existing mounting points.
- Given the tweeter placement in the A-pillars, soundstage characteristics might benefit more from higher-quality tweeters in those positions than from upgrading to coaxial speakers in the doors, which would place additional tweeters at a lower height.