2009 Nissan Cube Speaker Sizes
The 2009 Nissan Cube factory audio system features an a-pillar location that accommodates a 1 inch speaker size, while the front door panel and rear door panel accommodate 6.5 inch speakers. Additionally, the rear location accepts 8 inch units. Available speaker types for system replacement and upgrade consist of tweeters, midbass, full-range units, and subwoofers.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear | 8 | Subwoofer |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2009 Nissan Cube Speaker Replacement Summary
4
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 1Replacement priority:
High: 1 Medium: 2 Low: 12009 Nissan Cube Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2009 Nissan Cube features a four-location speaker configuration with dedicated A-pillar tweeter positions that could allow for component system installations when paired with the front door woofers.
- Both front and rear door panels accommodate 6.5-inch speakers that accept either midbass drivers or full-range units, providing flexibility in component versus coaxial speaker selection.
- The rear location houses an 8-inch subwoofer position, which may offer some low-frequency reinforcement without requiring a separate enclosure installation.
- Upgrading the front door 6.5-inch positions would likely be the priority for sound improvement, as these locations typically handle the primary midrange and imaging responsibilities in the factory configuration.
- The 1-inch A-pillar tweeter locations suggest the factory system may have included a component setup, meaning replacements would need to maintain proper crossover compatibility with the midbass drivers.
- The dual-DIN and single-DIN radio compatibility indicates the head unit opening can accommodate either aftermarket receiver format, potentially enabling integration of amplification for upgraded speakers.
- The 8-inch rear subwoofer location might benefit from a powered replacement or dedicated amplifier channel to properly extend the lower frequency response range.
- Component speakers in the front positions could utilize the existing A-pillar tweeter mounting points, potentially reducing installation complexity compared to surface-mounting alternatives.