2014 Nissan Cube Speaker Sizes
The 2014 Nissan Cube factory audio system features specific locations for sound reproduction. The a-pillar accepts a 1 inch speaker size, front and rear door panels accommodate 6.5 inch speakers, and the rear supports an 8 inch unit. Tweeter, midbass, full-range, and subwoofer components serve as functional replacement and upgrade options for these locations.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear | 8 | Subwoofer |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2014 Nissan Cube Speaker Replacement Summary
4
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 1Replacement priority:
High: 1 Medium: 2 Low: 12014 Nissan Cube Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2014 Nissan Cube features a four-location speaker layout with A-pillar tweeters and matching front and rear door panels, suggesting a factory system designed with basic sound staging in mind.
- Both front and rear door panels accommodate 6.5 inch speakers that can accept either midbass or full-range drivers, providing flexibility in component selection during replacement.
- The 1 inch A-pillar tweeter location may indicate a factory two-way setup where high frequencies are separated from the door-mounted speakers, though aftermarket tweeters in this position could enhance clarity when paired with midbass drivers in the doors.
- An 8 inch subwoofer location in the rear suggests factory provisions for low-frequency reinforcement, though this size typically represents a modest bass output compared to larger aftermarket alternatives.
- The dual DIN radio compatibility offers options for both single DIN head units with storage pockets and double DIN touchscreen receivers without requiring dash modifications.
- Replacing the door panel speakers first may yield the most noticeable improvement in overall sound quality, as these positions handle the majority of the audible frequency range in typical listening conditions.
- The midbass/full-range compatibility in the door positions allows for either a simple full-range upgrade or a more sophisticated component system approach with separate woofers and the A-pillar tweeters.
- The 8 inch rear subwoofer location may benefit from an aftermarket driver with higher power handling and lower frequency response if bass output is a priority during system upgrades.