2014 Nissan Juke Speaker Sizes
The 2014 Nissan Juke factory audio system incorporates multiple locations for sound reproduction. The a-pillar accommodates a 1 inch speaker size, while the front door panel and rear door panel accept 6.5 inch units. Furthermore, the dashboard and front door accommodate 4 inch speakers, and the rear side panel supports an 8 inch unit. Compatible speaker types for a replacement upgrade consist of tweeters, midbass, full-range units, and woofers.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 8 | Woofer |
|
2014 Nissan Juke Speaker Replacement Summary
5
total positions
3
easy to replace
2
high priority
1
professional only
Replacement difficulty:
Low: 3 Medium: 1 High: 1Replacement priority:
High: 2 Medium: 1 Low: 22014 Nissan Juke Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2014 Nissan Juke features a component speaker configuration with separate 1-inch tweeters positioned in both the A-pillar and front door panels, which suggests that replacing the front stage components may take priority for those seeking improved clarity in the higher frequencies.
- The front and rear door panels accommodate 6.5-inch speakers that can function as either midbass drivers or full-range units, providing flexibility in component selection based on whether the factory tweeter locations will be utilized or replaced.
- An 8-inch woofer location exists in the rear side panel, which could contribute to enhanced low-frequency output when paired with appropriate aftermarket subwoofer or midbass drivers designed for that mounting position.
- The presence of dedicated tweeter positions in the A-pillars typically indicates a factory-installed premium audio configuration, though aftermarket replacements in these locations may require mounting adapters or custom fabrication depending on the specific speakers selected.
- The radio supports both single DIN and double DIN head units, which allows for significant flexibility in upgrading the source unit to one with higher pre-amp voltage outputs that could better drive aftermarket speakers.
- Replacing the 6.5-inch door speakers with higher-sensitivity units might produce noticeable sound improvement even without amplification, though the existing tweeter locations would likely need to remain functional to maintain balanced frequency response.
- The rear 8-inch woofer position occupies a size range that falls between typical midrange drivers and dedicated subwoofers, which may limit options for direct replacements unless custom enclosures or mounting brackets are fabricated.