2012 Nissan Cube Speaker Sizes
The 2012 Nissan Cube factory audio system features the a-pillar which accommodates a 1 inch speaker size, while the front door panel and rear door panel support 6.5 inch units, and the rear accepts 8 inch speakers. Compatible types for replacement and upgrade include tweeter, midbass, full-range, and subwoofer components.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear | 8 | Subwoofer |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2012 Nissan Cube Speaker Replacement Summary
4
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 1Replacement priority:
High: 1 Medium: 2 Low: 12012 Nissan Cube Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2012 Nissan Cube features a four-location speaker configuration with dedicated tweeter positions in the A-pillars and larger driver positions in both front and rear door panels.
- The A-pillar locations accommodate 1-inch tweeters, which handle high-frequency reproduction in the upper dashboard area near the windshield base.
- Both front and rear door panels use identical 6.5-inch speakers that can accept either midbass drivers or full-range speakers depending on the desired audio system configuration.
- A rear 8-inch subwoofer location provides low-frequency output, which may be factory-equipped or available as an upgrade point depending on the original audio package.
- The door panel speakers represent the primary upgrade priority since they handle the majority of the audible frequency spectrum and directly impact overall sound quality.
- Component speaker systems would utilize the existing A-pillar tweeter locations along with midbass drivers in the door panels, while coaxial full-range speakers could simplify installation by combining frequencies in the door positions.
- The 8-inch rear subwoofer position is relatively compact compared to typical aftermarket subwoofer installations, potentially limiting low-frequency extension and output capability.
- Upgrading the door panel speakers to higher sensitivity models could provide noticeable volume and clarity improvements without requiring additional amplification.
- The single DIN or double DIN radio compatibility allows for head unit replacement options ranging from basic receivers to multimedia navigation systems.
- Aftermarket tweeters in the A-pillar locations should match the impedance and sensitivity characteristics of replacement door speakers when building a component system.