2016 Nissan Kicks Speaker Sizes

The 2016 Nissan Kicks factory audio system features an a-pillar location that accommodates a 1 inch speaker size, while the front door panel and rear door panel accommodate 6.75 inch units and 5.25 inch units respectively. Compatible speaker types for a sound system replacement and upgrade include tweeter, midbass, and full-range units.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
A-Pillar 1 Tweeter
  • Requires panel disassembly
  • Professional installation recommended
  • Low replacement priority
  • Replacement difficulty: high
Front Door Panel 6.75 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Door Panel 5.25 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

2016 Nissan Kicks Speaker Replacement Summary

3 total positions
2 easy to replace
1 high priority
1 professional only

Replacement difficulty:

Low: 2 Medium: 0 High: 1

Replacement priority:

High: 1 Medium: 1 Low: 1

Additional Notes

  • The front door panel positions in the 2016 Nissan Kicks appear to take a 6.75-inch driver, which is a somewhat less common size compared to the more widely available 6.5-inch or 7-inch formats, so component compatibility may be worth verifying before selecting a replacement.
  • The A-pillar location is sized for a 1-inch tweeter, suggesting the factory audio configuration may have included a degree of frequency separation at the front stage, with high-frequency reproduction handled separately from the mid-range and bass content.
  • The rear door panel accommodates a 5.25-inch driver in a midbass or full-range capacity, which is generally considered a secondary replacement priority compared to the front stage positions, as front speaker placement tends to have a greater influence on perceived soundstage imaging.
  • Where a full-range driver is installed in the front door panel position, it would be handling a wide frequency spectrum from a single cone, whereas a dedicated midbass driver paired with the A-pillar tweeter could potentially allow for a more defined separation of high and low frequencies across the front soundstage.
  • The rear door panel's 5.25-inch size may produce somewhat less low-frequency output compared to the larger 6.75-inch front drivers, which could result in an uneven tonal balance between the front and rear of the cabin if both positions are not considered together during a speaker replacement.